DES-3226L Layer 2
Fast Ethernet Switch User’s Guide
Parameter
Description
Port
Corresponding number to a port on the switch.
PVID
PVID is used to decide whether received untagged packets belong to a VLAN.
GVRP
For each corresponding port, GARP VLAN Registration Protocol can be
Enabled
or
Disabled
.
Ingress
Checking
Ingress checking is used to check if the received port is a member port of the
VLAN whose VID is equal to the VID of incoming packets. If not, the ingress
checking will drop the packets.
Port-Based VLANs
If you have chosen
Port-Based VLAN
, the heading
Port-Based VLAN
will appear in the
VLAN Configuration
folder. Clicking on this folder will open the following window:
Figure 6-20. Port-Based VLANs window
The
Port-Based VLAN
window shows the following information:
Parameter
Description
VLAN ID (VID)
The VLAN ID of the VLAN that was created.
VLAN Name
The name of the VLAN that is being created.
Port Members
Corresponds to the ports that are members of the particular VLAN.
To create a
Port-based VLAN,
click
New
, revealing the following window:
82
