DES-3226L Layer 2
Fast Ethernet Switch User’s Guide
Figure 5-15. SNMP Group Table – Add window
Parameter
Description
Group Name
Type an alphanumeric string of up to 32 characters. This is used to
identify the new SNMP group of SNMP users.
Read View Name
This name is used to specify the SNMP group created that can request
SNMP messages.
Write View Name
Specify a SNMP group name for users that are allowed SNMP write
privileges to the switch’s SNMP agent.
Notify View Name
Specify a SNMP group name for users that can receive SNMP trap
messages generated by the Switch’s SNMP agent.
Security Model
SNMPv1
– Specifies that SNMP version 1 will be used.
SNMPv2
– Specifies that SNMP version 2c will be used. The SNMP v2c
supports both centralized and distributed network management strategies.
It includes improvements in the Structure of Management Information
(SMI) and adds some security features.
USM
– (User-based Security Module) Specifies that the SNMP version 3
will be used. SNMP v3 provides secure access to devices through a
combination of authentication and encrypting packets over the network.
Security Level
NoAuthNoPriv
−
Specifies that there will be no authorization and no
encryption of packets sent between the Switch and a remote SNMP
manager.
AuthNoPriv
−
Specifies that authorization will be required, but there will be
no encryption of packets sent between the Switch and a remote SNMP
manager.
AuthPriv
−
Specifies that authorization will be required, and that packets
sent between the Switch and a remote SNMP manger will be encrypted.
37
