DES-3226L Layer 2
Fast Ethernet Switch User’s Guide
Serial Port Settings
The
Serial Port Settings
window may be found in the
Basic Setup
folder. This window is
used to configure the console settings for the Command Line Interface or for a Telnet session.
Figure 5-6. Serial Port Settings window
The
Serial Port Settings
window is used to change and view the Console settings for your
switch. The default
Baud Rate
for this switch is set at
9600
and may be altered from
119200
,
38400
, to
115200
to perform different functions.
Data Bits
,
Parity Bits
and
Stop Bits
are
read only fields and cannot be changed using the web-based manager. The
Auto Logout
field
may be set to
Never
,
2 minutes
,
5 minutes
,
10 minutes
, and
15 minutes
,
depending on the time
the user wishes the Switch to be idle before automatically logging out. The default for this
setting is 10 minutes.
30
