manualshive.com logo in svg

D-Link DES-3028, Cli Reference Manual

The D-Link DES-3028 is a high-performance switch designed for businesses. With advanced features and reliable performance, it provides seamless connectivity for networks. For complete control and configuration, the CLI Reference Manual is essential. Easily download the free manual from our website manualshive.com to maximize the capabilities of your DES-3028.

Share
Download
background image

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual

 

 

38

DES-3028P:4#show snmp view 

Command: show snmp view 

 

 Vacm View Table Settings 

 View Name                 Subtree                    View Type 

 --------------------      -----------------------    ---------- 

 ReadView                   1                          Included 

 WriteView                  1                          Included 

 NotifyView                 1.3.6                      Included 

 restricted                 1.3.6.1.2.1.1              Included 

 restricted                 1.3.6.1.2.1.11             Included 

 restricted                 1.3.6.1.6.3.10.2.1         Included 

 restricted                 1.3.6.1.6.3.11.2.1         Included 

 restricted                 1.3.6.1.6.3.15.1.1         Included 

 CommunityView              1                          Included 

 CommunityView              1.3.6.1.6.3                Excluded 

 CommunityView              1.3.6.1.6.3.1              Included 

  

Total Entries: 11 

 

DES-3028P:4# 

 

create snmp community 

Purpose 

Used to create an SNMP community string to define the relationship 
between the SNMP manager and an agent. The community string acts like 
a password to permit access to the agent on the Switch. One or more of the 
following characteristics can be associated with the community string: 

An Access List of IP addresses of SNMP managers that are permitted to 
use the community string to gain access to the Switch’s SNMP agent. 

An MIB view that defines the subset of all MIB objects that will be 
accessible to the SNMP community. 

read_write

 or 

read_only

 level permission for the MIB objects accessible to 

the SNMP community. 

Syntax 

create snmp community <community_string 32> view <view_name 32> 
[read_only | read_write] 

Description 

 

The 

create snmp community

 command is used to create an SNMP 

community string and to assign access-limiting characteristics to this 
community string. 

Parameters 

<community_string 32> 

 An alphanumeric string of up to 32 characters that 

is used to identify members of an SNMP community. This string is used like 
a password to give remote SNMP managers access to MIB objects in the 
Switch’s SNMP agent. 

view <view_name 32> 

 An alphanumeric string of up to 32 characters that 

is used to identify the group of MIB objects that a remote SNMP manager is 
allowed to access on the Switch. 

read_only 

 Specifies that SNMP community members using the community 

string created with this command can only read the contents of the MIBs on 
the Switch. 

read_write

 

 Specifies that SNMP community members using the 

community string created with this command can read from and write to the 
contents of the MIBs on the Switch. 

Restrictions 

Only Administrator-level users can issue this command. 

Summary of Contents for DES-3028







































































































































































































































































































































































Reviews:

No comments

Related manuals for DES-3028

D-Link TM DES-6500 Command Line Interface Reference Manual preview
TM DES-6500
Brand: D-Link Pages: 267
H3C S3100 Series Command Manual preview
S3100 Series
Brand: H3C Pages: 1089
Ubisys S1 Reference Manual preview
S1
Brand: Ubisys Pages: 40
IDEC HS5L Series Instruction Sheet preview
HS5L Series
Brand: IDEC Pages: 8
IDEM SAFETY SWITCHES MPR Operating Instructions preview
MPR
Brand: IDEM SAFETY SWITCHES Pages: 2
JDS Uniphase SCG Series User Manual preview
SCG Series
Brand: JDS Uniphase Pages: 37
United Electric Controls 54 Series Assembly, Installation And Operation Instructions preview
54 Series
Brand: United Electric Controls Pages: 6
6TL YAV904X8 Manual preview
YAV904X8
Brand: 6TL Pages: 25
Raritan MCCAT18 Specifications preview
MCCAT18
Brand: Raritan Pages: 4
Aube Technologies TI034-3W Installation And User Manual preview
TI034-3W
Brand: Aube Technologies Pages: 118
HMS Networks Anybus SP2555 Startup Manual preview
Anybus SP2555
Brand: HMS Networks Pages: 16
Indu-Sol PROmesh P10 Quick Start User Manual preview
PROmesh P10
Brand: Indu-Sol Pages: 9
Zektor HDA604 User Manual preview
HDA604
Brand: Zektor Pages: 84
Eaton Pow-R-Line SPX0361126 Maintenance Manual preview
Pow-R-Line SPX0361126
Brand: Eaton Pages: 584
Touch-plate 10138 Manual preview
10138
Brand: Touch-plate Pages: 12
UNICOM SmartGST-2600M Specifications preview
SmartGST-2600M
Brand: UNICOM Pages: 1
Patton electronics SmartNode 4658 Series Quick Start Manual preview
SmartNode 4658 Series
Brand: Patton electronics Pages: 12
Setra Systems SSC-2S Operation And Installation Instructions preview
SSC-2S
Brand: Setra Systems Pages: 4

Brands by name

Popular brands

Load more brands