manualshive.com logo in svg

D-Link DES-3028, Cli Reference Manual

The D-Link DES-3028 is a high-performance switch designed for businesses. With advanced features and reliable performance, it provides seamless connectivity for networks. For complete control and configuration, the CLI Reference Manual is essential. Easily download the free manual from our website manualshive.com to maximize the capabilities of your DES-3028.

Share
Download
background image

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual

 

 

224

config authen parameter attempt 

Restrictions 

Only Administrator-level users can issue this command. 

Example usage: 

 

To set the maximum number of authentication attempts at 5: 

DES-3028P:4#config authen parameter attempt 5 

Command: config authen parameter attempt 5 

 

Success. 

 

DES-3028P:4# 

 

 

show authen parameter 

Purpose 

Used to display the authentication parameters currently configured 
on the Switch. 

Syntax 

show authen parameter 

Description 

This command will display the authentication parameters currently 
configured on the Switch, including the response timeout and user 
authentication attempts. 

This command will display the following fields: 

Response timeout

 – The configured time allotted for the Switch to 

wait for a response of authentication from the user attempting to log 
in from the command line interface or telnet interface. 

User attempts

 

 The maximum number of attempts the user may try 

to become authenticated by the Switch, before being locked out. 

Parameters None. 

Restrictions None. 

Example usage: 

To view the authentication parameters currently set on the Switch: 

DES-3028P:4#show authen parameter  

Command: show authen parameter 

 

Response Timeout : 60 seconds 

User Attempts        : 5 

 

DES-3028P:4# 

 

enable admin 

Purpose 

Used to promote user level privileges to administrator level privileges. 

Syntax 

enable admin 

Description 

This command is for users who have logged on to the Switch on the 
normal user level, to become promoted to the administrator level. 
After logging on to the Switch users will have only user level 
privileges. To gain access to administrator level privileges, the user 
will enter this command and will have to enter an authentication 
password. Possible authentication methods for this function include 
TACACS, XTACACS, , RADIUS, user defined server 
groups, local enable (local account on the Switch), or no 

Summary of Contents for DES-3028







































































































































































































































































































































































Reviews:

No comments

Related manuals for DES-3028

LEGRAND Raritan Dominion LX II Quick Setup Manual preview
Raritan Dominion LX II
Brand: LEGRAND Pages: 7
J-Tech Digital JTECH-HD4X48 User Manual preview
JTECH-HD4X48
Brand: J-Tech Digital Pages: 28
Generac Power Systems 004635-3 Owner'S Manual preview
004635-3
Brand: Generac Power Systems Pages: 20
CTS FOS-3124 SERIES User Manual preview
FOS-3124 SERIES
Brand: CTS Pages: 223
Synology NEXT-POE4210L2S-TP Quick Installation And Initial Configuration preview
NEXT-POE4210L2S-TP
Brand: Synology Pages: 15
Accton Technology EtherHub-16 Quick Start Manual preview
EtherHub-16
Brand: Accton Technology Pages: 10
Lancom GS-3528X Installation Manual preview
GS-3528X
Brand: Lancom Pages: 23
SUCO 0140 Series Operating Instructions preview
0140 Series
Brand: SUCO Pages: 2
C&H Technologies M218 User Manual preview
M218
Brand: C&H Technologies Pages: 28
Accton Technology CheetaHub Classic-2041 Quick Installation Manual preview
CheetaHub Classic-2041
Brand: Accton Technology Pages: 7
TE Connectivity FSA-PLUS Technical Manual preview
FSA-PLUS
Brand: TE Connectivity Pages: 32
Comnet CNGE2FE8MSPOE2 Installation And Operation Manual preview
CNGE2FE8MSPOE2
Brand: Comnet Pages: 105
jbc P105 Instruction Manual preview
P105
Brand: jbc Pages: 4
IRT Electronics AMS-4170 Instruction Book preview
AMS-4170
Brand: IRT Electronics Pages: 17
Cables to Go UH846 User Manual preview
UH846
Brand: Cables to Go Pages: 3
Datavideo SEB-1200 Instruction Manual preview
SEB-1200
Brand: Datavideo Pages: 90
CAI Networks 690PG Installation Manual preview
690PG
Brand: CAI Networks Pages: 12
IDEM SAFETY SWITCHES Guardian Line Series Datasheet preview
Guardian Line Series
Brand: IDEM SAFETY SWITCHES Pages: 4

Brands by name

Popular brands

Load more brands