manualshive.com logo in svg

D-Link DES-3028, Cli Reference Manual, Page: 293 / 358

Share
Download
D-Link DES-3028 Cli Reference Manual Download Page 293

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual

 

 

288

 

config mcast_filter_profile 

Purpose 

This command configures a  multicast addresses profile. 

Syntax 

config mcast_filter_profile [profile_id < value 1-24>| 
profile_name <name> ] { profile_name <name> | [add | delete ] 
<mcast_address_list>} 

Description 

This command is used to configure the multicast filter profiles. 

Parameters 

profile_id

 

 ID of the profile. 

profile_name

 

 Provides a meaningful description for the profile. 

<mcast_address_list> 

 List of the multicast addresses to be put in 

the profile. 

You can either specify a single multicast IP address or a range of 
multicast addresses. 

Restrictions 

Only Administrator-level users can issue this command. 

Example usage: 

 

To configure an mcast filter profile: 

DES-3028P:4# config mcast_filter_profile profile_id 2 add 
225.1.1.1 - 225.1.1.1  

Command: config mcast_filter_profile profile_id 2 add 225.1.1.1 -
225.1.1.1 

 

Success. 

 

DES-3028P:4#

 

 

delete mcast_filter_profile 

Purpose 

This command deletes a multicast address profile. 

Syntax 

delete mcast_filter_profile profile_id  [<value 1-24> | all] 

Description 

This command deletes a multicast address profile 

Parameters 

profile_id

 

 ID of the profile 

all 

 All multicast address profiles will be deleted. 

Restrictions 

Only Administrator-level users can issue this command. 

Example usage: 

 

To delete a multicast address profile: 

DES-3028P:4# delete mcast_filter_profile profile_id  3   

Command: delete mcast_filter_profile profile_id  3 

 

Success.   

 

DES-3028P:4#

 

 

delete mcast_filter_profile 

Purpose 

This command deletes a multicast address profile. 

Syntax 

delete mcast_filter_profile profile_name <name 1-32> 

Summary of Contents for DES-3028







































































































































































































































































































































































Reviews:

No comments