Home
/
D-Link
/
DES-3028
/
Cli Reference Manual

D-Link DES-3028, Cli Reference Manual, Page: 159 / 358

Share

Page: 159 / 358

D-Link DES-3028 Cli Reference Manual Download Page 159

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual

154

DES-3028P:4#

config 802.1x auth_parameter

Purpose

Used to configure the 802.1X Authentication parameters on a range
of ports. The default parameter will return all ports in the specified
range to their default 802.1X settings.

Syntax

config 802.1x auth_parameter ports [<auth_portlist> | all]
[default | {direction [both | in] | port_control [force_unauth |
auto | force_auth] | quiet_period <sec 0-65535> | tx_period <sec
1-65535> | supp_timeout <sec 1-65535> | server_timeout <sec 1-
65535> | max_req <value 1-10> | reauth_period <sec 1-65535> |
enable_reauth [enable | disable]}]

Description The

config 802.1x auth_parameter

command is used to configure

the 802.1X Authentication parameters on a range of ports. The
default parameter will return all ports in the specified range to their
default 802.1X settings.

Parameters

<auth_portlist>



Specifies a port or range of ports to be configured.

all



Specifies all of the ports on the Switch.

default



Returns all of the ports in the specified range to their

802.1X default settings.

direction [both | in]



Determines whether a controlled port blocks

communication in both the receiving and transmitting directions, or
just the receiving direction.

port_control



Configures the administrative control over the

authentication process for the range of ports. The user has the
following authentication options:



force_auth



Forces the Authenticator for the port to

become authorized. Network access is allowed.



auto



Allows the port’s status to reflect the outcome of the

authentication process.



force_unauth



Forces the Authenticator for the port to

become unauthorized. Network access will be blocked.

quiet_period <sec 0-65535>



Configures the time interval between

authentication failure and the start of a new authentication attempt.

tx_period <sec 1-65535>



Configures the time to wait for a

response from a supplicant (user) to send EAP Request/Identity
packets.

supp_timeout <sec 1-65535>



Configures the time to wait for a

response from a supplicant (user) for all EAP packets, except for the
Request/Identity packets.

server_timeout <sec 1-65535>



Configure the length of time to wait

for a response from a RADIUS server.

max_req <value 1-10>



Configures the number of times to retry

sending packets to a supplicant (user).

reauth_period <sec 1-65535>



Configures the time interval between

successive re-authentications.

enable_reauth [enable | disable]



Determines whether or not the

Switch will re-authenticate. Enabled causes re-authentication of
users at the time interval specified in the Re-authentication Period
field, above.

Restrictions

Only Administrator-level users can issue this command.

«
...
157
158
159
160
161
...
»

Summary of Contents for DES-3028







































































































































































































































































































































































Reviews:

No comments