manualshive.com logo in svg

D-Link DES-3028, Cli Reference Manual, Page: 180 / 358

Share
Download
D-Link DES-3028 Cli Reference Manual Download Page 180

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual

 

 

175

Example usage: 

To display all of the currently configured access profiles on the Switch: 

DES-3028P:4#show access_profile 

Command: show access_profile 

 

Access Profile Table 

 

================================================================================

Profile ID: 101                        Type: IPv4 Frame Filter - ICMP 

================================================================================

Masks  Option 

VLAN             Source IP       Dest. IP        DSCP Prot 

---------------- --------------- --------------- ---- ---- 

                 20.0.0.0        10.0.0.0             ICMP 

 

================================================================================

Total Profile Entries: 1 

 

Total Used Rule Entries: 0 

 

Total Unused Rule Entries: 256 

 

DES-3028P:4# 

 

create cpu access_profile 

Purpose 

Used to create an access profile specifically for 

CPU Interface Filtering

 on the Switch and to 

define which parts of each incoming frame’s header the Switch will examine. Masks can be 
entered that will be combined with the values the Switch finds in the specified frame header 
fields. Specific values for the rules are entered using the 

config cpu access_profile 

command, 

below. 

Syntax 

create cpu access_profile <value 1-3> [ethernet {vlan | source_mac <macmask> |     
destination_mac <macmask> | 802.1p | ethernet_type} | ip {vlan | source_ip_mask 
<netmask> | destination_ip_mask <netmask> | dscp | [icmp {type | code} | igmp { type } |       
tcp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-0xffff> | flag_mask [ all | 
{urg | ack | psh | rst | syn | fin}] } | udp {src_port_mask <hex 0x0-0xffff> | dst_port_mask 
<hex 0x0-0xffff>} | protocol_id_mask <hex 0x0-0xff> {user_define <hex 0x0-0xffffffff>}]}| 
packet_content_mask {offset_0-15 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> | offset_16-31<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 
0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_32-47 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> 
<hex 0x0-0xffffffff><hex 0x0-0xffffffff> | offset_48-63 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> 
<hex 0x0-0xffffffff> <hex 0x0-0xffffffff> | offset_64-79 <hex 0x0-0xffffffff> <hex 0x0-
0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff>}]

 

Description 

The

 create cpu access_profile 

command is used to create an access profile used only for CPU 

Interface Filtering. Masks can be entered that will be combined with the values the Switch finds in 
the specified frame header fields. Specific values for the rules are entered using the 

config cpu 

access_profile

 command, below. 

Parameters 

 

 

 

 

 

 

ethernet

 

 Specifies that the Switch will examine the layer 2 part of each packet header. 

 

vlan

 

 Specifies that the Switch will examine the VLAN part of each packet header. 

 

source_mac <macmask> 

 

Specifies to examine the source MAC address mask. 

 

destination_mac <macmask> 

 

Specifies to examine the destination MAC address mask. 

 

802.1p

 

 Specifies that the Switch will examine the 802.1p priority value in the frame’s 

header. 

 

ethernet_type 

 Specifies that the Switch will examine the Ethernet type value in each 

Summary of Contents for DES-3028







































































































































































































































































































































































Reviews:

No comments