manualshive.com logo in svg

D-Link DES-3028, Cli Reference Manual

The D-Link DES-3028 is a high-performance switch designed for businesses. With advanced features and reliable performance, it provides seamless connectivity for networks. For complete control and configuration, the CLI Reference Manual is essential. Easily download the free manual from our website manualshive.com to maximize the capabilities of your DES-3028.

Share
Download
background image

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual

 

 

267

config vlan_trunk 

Purpose 

Used to configure a port as a VLAN trunk port. 

Syntax 

config vlan_trunk ports [<portlist>|all] | state [enable|disable]  

Description 

This command is used to configure a port as a VLAN trunk port. By 
default, none of the ports on the Switch are VLAN trunk ports. A VLAN 
trunk port and a non-VLAN trunk port cannot be grouped as an 
aggregated link. To change the VLAN trunk setting for an aggregated 
link, the user must apply the command to the master port. However, this 
setting will disappear as the aggregated link is destroyed, and the VLAN 
trunk setting of the individual port will follow the original setting of the 
port. 

If the command is applied to link aggregation member port excluding the 
master, the command will be rejected.  

The ports with different VLAN configurations are not allowed to form an 
aggregated link. However, if they are specified as VLAN trunk ports, they 
are allowed to form an aggregated link. 

For a VLAN trunk port, the VLANs on which the packets can be by 
passed will not be advertised by GVRP on that particular port. However, 
since the traffic on these VLANs are forwarded, this vlan trunk port 
should participate the MSTP instances corresponding to these VLAN. 

Parameters 

<portlist> 

 Specifies the list of ports to be configured. 

enable

 

 Specifies that the port is a VLAN trunk port. 

disable

 

 Specifies that the port is not a VLAN trunk port. 

Restrictions 

Only Administrator-level users can issue this command. 

Example usage: 

 

To configure a VLAN Trunk port: 

DES-3028P:4#config vlan_trunk ports 1-5 state enable 

Command: config vlan_trunk ports 1-5 state enable 

 

Success. 

 

DES-3028P:4#

 

 

Summary of Contents for DES-3028







































































































































































































































































































































































Reviews:

No comments

Related manuals for DES-3028

Magnetrol B75 Installation And Operating Manual preview
B75
Brand: Magnetrol Pages: 28
Zektor HDA800 User Manual preview
HDA800
Brand: Zektor Pages: 65
Campbell HUB-SDM5 Instruction Manual preview
HUB-SDM5
Brand: Campbell Pages: 10
Paugge ENT-MX20B16X16 User Manual preview
ENT-MX20B16X16
Brand: Paugge Pages: 20
Lindy 32 277 Installation And Use Manual preview
32 277
Brand: Lindy Pages: 38
Wavetronix Click 223 Installation preview
Click 223
Brand: Wavetronix Pages: 3
Fortinet FortiSwitch 424E Series Quick Start Manual preview
FortiSwitch 424E Series
Brand: Fortinet Pages: 11
Cabletron Systems SmartSTACK ETHERNET ELS10-27 User Manual preview
SmartSTACK ETHERNET ELS10-27
Brand: Cabletron Systems Pages: 126
Aruba Instant On 1930 Series Installation, Safety, And Regulatory Information preview
Instant On 1930 Series
Brand: Aruba Pages: 8
ADDER ADDERView Secure AVS-4128 User Manual preview
ADDERView Secure AVS-4128
Brand: ADDER Pages: 24
Velleman VMS8 Quick Start Manual preview
VMS8
Brand: Velleman Pages: 4
H-Tronic WPS 3000 Manual preview
WPS 3000
Brand: H-Tronic Pages: 20
Belkin F1DA208Z User Manual preview
F1DA208Z
Brand: Belkin Pages: 43
Gembird NS-16P2 User Manual preview
NS-16P2
Brand: Gembird Pages: 10
Cabletron Systems Spectrum 2E42-27 Management Manual preview
Spectrum 2E42-27
Brand: Cabletron Systems Pages: 77
Micronor MR380 Series Instruction Manual preview
MR380 Series
Brand: Micronor Pages: 25
CYP CSC-5500CVE Operation Manual preview
CSC-5500CVE
Brand: CYP Pages: 40
Larson Electronics EXP-EL-CSS-250A-R1-NO Instruction Manual preview
EXP-EL-CSS-250A-R1-NO
Brand: Larson Electronics Pages: 3

Brands by name

Popular brands

Load more brands