manualshive.com logo in svg

D-Link DES-3028, Cli Reference Manual

The D-Link DES-3028 is a high-performance switch designed for businesses. With advanced features and reliable performance, it provides seamless connectivity for networks. For complete control and configuration, the CLI Reference Manual is essential. Easily download the free manual from our website manualshive.com to maximize the capabilities of your DES-3028.

Share
Download
background image

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual

 

 

179

config cpu access_profile 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameters 

The value is used to index the rule created.

 

ethernet

 

 Specifies that the Switch will look only into the layer 2 part of each packet. 

vlan <vlan_name 32>

 

 Specifies that the access profile will apply to only to this 

VLAN. 

source_mac <macaddr>

 

 Specifies that the access profile will apply to this source 

MAC address. 

destination_mac <macaddr>

 

 Specifies that the access profile will apply to this 

destination MAC address.

 

ethernet_type <hex 0x0-0xffff> 

 Specifies that the access profile will apply only to 

packets with this hexadecimal 802.1Q Ethernet type value in the packet header.

 

ip

 

 Specifies that the Switch will look into the IP fields in each packet.

 

vlan <vlan_name 32>

  

 Specifies that the access profile will apply to only this VLAN. 

source_ip <ipaddr>

 

 Specifies that the access profile will apply to only packets with 

this source IP address. 

destination_ip <ipaddr>

 

 Specifies that the access profile will apply to only packets 

with this destination IP address. 

dscp <value 0-63> 

 Specifies that the access profile will apply only to packets that 

have this value in their Type-of-Service (DiffServ code point, DSCP) field in their 
IP packet header 

icmp

 

 Specifies that the Switch will examine the Internet Control Message Protocol 

(ICMP) field within each packet.   

igmp 

 Specifies that the Switch will examine the Internet Group Management 

Protocol (IGMP) field within each packet. 

tcp

 

 Specifies that the Switch will examine the Transmission Control Protocol (TCP) 
field within each packet. 

src_port <value 0-65535>

 

 Specifies that the access profile will apply only to 

packets that have this TCP source port in their TCP header. 

dst_port <value 0-65535> 

 Specifies that the access profile will apply only to 

packets that have this TCP destination port in their TCP header. 

protocol_id <value 0-255>

 

 Specifies that the Switch will examine the Protocol field in 

each packet and if this field contains the value entered here, apply the following rules. 

udp

 

 Specifies that the Switch will examine the Transmission Control Protocol (TCP) field 

within each packet. 

src_port <value 0-65535> 

 Specifies that the access profile will apply only to 

packets that have this UDP source port in their header.   

dst_port <value 0-65535> 

 Specifies that the access profile will apply only to 

packets that have this UDP destination port in their header.   

protocol_id <value 0-255>

 

 Specifies that the Switch will examine the protocol field in 

each packet and if this field contains the value entered here, apply the following rules.

 

user_define_mask <hex 0x0-0xffffffff> 

 Specifies that the rule applies to the 

IP protocol ID and the mask options behind the IP header. 

packet_content_mask 

– Specifies that the Switch will mask the packet header beginning 

with the offset value specified as follows: 

offset_0-76 

- Enter a value in hex form to mask the packet from byte 0 to byte 

76. 

<portlist> 

 Specifies a port or range of ports to be configured. 

permit | deny 

– Specify that the packet matching the criteria configured with command will 

either be permitted entry to the cpu or denied entry to the CPU. 

time_range <range_name 32> 

– Choose this parameter and enter the name of the Time 

Range settings that has been previously configured using the 

config time_range

 

command. This will set specific times when this access rule will be enabled or disabled on 
the Switch. 

delete access_id <value 1-5> 

 

Use this to remove a previously created access rule in a 

Summary of Contents for DES-3028







































































































































































































































































































































































Reviews:

No comments

Related manuals for DES-3028

National Instruments SCXI-1127 Getting Started Manual preview
SCXI-1127
Brand: National Instruments Pages: 32
Lucent Technologies LambdaUnite MSS Installation Manual preview
LambdaUnite MSS
Brand: Lucent Technologies Pages: 388
LevelOne Infinity IES-1881 Quick Installation Manual preview
Infinity IES-1881
Brand: LevelOne Pages: 2
3Com 3C63100-AC-C - PathBuilder S600... Reference Manual preview
3C63100-AC-C - PathBuilder S600...
Brand: 3Com Pages: 232
LAPP ETHERLINE ACCESS U04TP01T Hardware Installation Manual preview
ETHERLINE ACCESS U04TP01T
Brand: LAPP Pages: 16
IOGear GCS62DP Quick Start Manual preview
GCS62DP
Brand: IOGear Pages: 10
ANTAIRA LMP-1204G-SFP Series Hardware Manual preview
LMP-1204G-SFP Series
Brand: ANTAIRA Pages: 20
Paugge ENT-MX20B16X16 User Manual preview
ENT-MX20B16X16
Brand: Paugge Pages: 20
NTI SE-15V-16-L Installation And Operation Manual preview
SE-15V-16-L
Brand: NTI Pages: 15
Extreme Networks ExtremeSwitching SLX 9540 Hardware Installation Manual preview
ExtremeSwitching SLX 9540
Brand: Extreme Networks Pages: 108
TP-Link Tapo S210 User Manual preview
Tapo S210
Brand: TP-Link Pages: 28
F&F PF-421 TRMS Manual preview
PF-421 TRMS
Brand: F&F Pages: 10
Topex multiSwitch User Manual preview
multiSwitch
Brand: Topex Pages: 170
Quintech RFS 0702 Operation And Adjustment Procedure preview
RFS 0702
Brand: Quintech Pages: 2
N-Tron 302MC-XX Installation Manual preview
302MC-XX
Brand: N-Tron Pages: 16
Ubiquiti EdgeSwitch Quick Start Manual preview
EdgeSwitch
Brand: Ubiquiti Pages: 14
Seastar Solutions pro-trim PT1000 Installation Manual preview
pro-trim PT1000
Brand: Seastar Solutions Pages: 2
ATEN CS62T User Manual preview
CS62T
Brand: ATEN Pages: 21

Brands by name

Popular brands

Load more brands