D-Link DCS-6220, User Manual

Page: 103 / 143

103
DCS-660 User’s Manual
D-Link Systems, Inc.
Using IP surveillance Software
Scheduling
(continued)
In this area you will select the video channel that you want to set a schedule for. Each video channel will
display a name, IP address, and location. Please note that when you switch between video channels in
this area, the changes in the schedule of the previous video channel will be saved automatically.
Primary Schedule
Schedule with Time Lines
Week Time-Line
In the figure below, Week time-line is displayed. It includes the time-line, schedule information, and the
selected day in the week.
Selected Day
Marking/Unmarking the Recording Time on the Week Time-Line
Click
Result in hour time-line
There are two different time-lines: hour unit time-line and week unit time-line. You can make your own
schedule by plotting markers in all time-lines. These two time lines are associated with each other. That
is, if you make changes in one time-line, the corresponding changes will be applied with scale to the
other three time-lines in the same schedule. Before you begin, make sure that you select “Once” (page
105) if you want to choose the days to record on.
The corresponding changes for the markers on the week time-line will be automatically added to the
hour time-lines, which is shown above. You can also mark and unmark the plotted bar by clicking and
dragging with the left and the right mouse button.