13
DCS-660 User’s Manual
D-Link Systems, Inc.
Installation Wizard
Installation is now complete.
IMPORTANT:
A hardware reset of the PTZ Internet Camera may be required if the
Installation Wizard
cannot find the
camera. To accomplish this reset, lightly insert a paper clip (or a similar sized tool) into the reset hole
on the side of the camera (see page 130 for the location of the reset hole). The LED on the front of the
camera will begin blinking alternately. When it stops the blinking cycle continue to hold in the reset button
for about 10 seconds.
The opening Installation Wizard screen will
appear and
show a MAC address of the
DCS-
6620
and an IP Address (which may or may not
be correct depending on what you have your
DCS-6620
connected to). If you have a DHCP*
server on your network, there will be a valid IP
Address displayed here, indicated by a “Yes”
under the assigned column.
*A DHCP server is a device that supplies IP
Addresses to its clients that are on the same
network.
Click
Finish
To access the Installation Wizard screen, click on the Installation
Wizard Icon on your desktop.
Summary of Contents for DCS-6220
