D-Link DAP-600P User Manual Download Page 89

Page: 89 / 235

DAP-600P

Wireless AC2600 Wave 2 MU-MIMO Dual Band

PoE Access Point / Router

User Manual

Configuring via Web-based Interface

WAN

This page is available if the

Router

WISP Repeater

mode was selected in the Initial

Configuration Wizard.

On the

Connections Setup

/ WAN

page, you can create and edit connections used by the access

point.

Figure 75. The

Connections Setup / WAN

page. The simplified mode.

To edit an existing connection, click the

EDIT

button. On the opened page, on the

Basic

tab, the

mandatory settings of this connection will be displayed. To view all available settings of the WAN
connection, go to the

All Settings

tab. Change the needed parameters and click the

APPLY

button.

To disconnect a connection and establish it again, click the

RECONNECT

button.

To remove all existing connections and create a new one, click the

CHANGE CONFIGURATION

button. Upon that the connection creation page opens.

To create several WAN connections, go to the advanced mode. To do this, click the

ADVANCED

MODE

button.

Page

of 235

Summary of Contents for DAP-600P












































































































































































































































Search results

Summary of Contents for DAP-600P

Reviews:

Brands by name

Popular brands

D-Link DAP-600P, User Manual

Search results

Summary of Contents for DAP-600P

Reviews:

Brands by name

Popular brands