DAP-600P
Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
If needed, you can add your own address resource records. To do this, click the
ADD
button (
)
in the
Hosts
section (
available if the
Router
or
WISP Repeater
mode was selected in the Initial
Configuration Wizard
).
Figure 69. Configuring the local interface. The
IPv4
tab. The window for adding a DNS record.
In the
IP address
field, specify a host from the internal or external network. You can choose a
device connected to the access point's LAN at the moment. To do this, select the relevant IPv4
address from the drop-down list (the field will be filled in automatically). In the
Name
field,
specify the domain name to which the specified IPv4 address will correspond. Click the
SAVE
button.
To edit an existing record, in the
Hosts
section, select the relevant line in the table. In the opened
window, change the needed parameters and click the
SAVE
button.
To remove a record, in the
Hosts
section, select the checkbox located to the left of the relevant line
in the table and click the
DELETE
button (
).
After completing the work with records, click the
APPLY
button.
Page
84
of 235
