DAP-600P
Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter
Description
Option 82 Circuit ID
Option 82 Remote ID
Option 82 Subscriber ID
Available if the
Router
or
WISP Repeater
mode was selected in
the Initial Configuration Wizard.
The value of the relevant field of DHCP option 82. Do not fill in the
fields unless your ISP or the administrator of the external DHCP
server provided these values.
When all needed settings are configured, click the
APPLY
button.
In the
DHCP Options
section, you can change default values for some options of DHCP protocol
(IP address, subnet mask, DNS servers) or specify additional parameters which the built-in DHCP
server should send to clients to configure the local network.
Figure 66. Configuring the local interface. The
IPv4
tab. The section for configuring DHCP options.
To do this, click the
ADD
button (
).
Figure 67. Configuring the local interface. The
IPv4
tab. The window for configuring a DHCP option.
In the opened window, you can specify the following parameters:
Parameter
Description
Known DHCP options
From the drop-down list, select an option which you want to
configure.
Options value
Specify the value for the selected option.
Force
Move the switch to the right to let the DHCP server send the
selected option regardless of the client's request.
Move the switch to the left to let the DHCP server send the selected
option only when the client requests it.
After specifying the needed parameters, click the
APPLY
button.
Page
82
of 235
