DAP-600P
Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Mesh Network Subordinate Device (Slave)
In order to configure DAP-600P as a subordinate device of your Mesh network, from the
Connection method
list, select the
Super Mesh
value. Then from the
Device Role
list, select
the
Slave
value. From the
Frequency band
list, select the band where your main device (in the
Master role) operates.
Then a device in the Slave role is configured in the assess point mode. In this mode you can change
the LAN IP address, set your own settings for the wireless network in the 2.4GHz and 5GHz bands,
and set your own password for access to the web-based interface of the device.
Figure 42. Configuring the Super Mesh function for a subordinate device.
Page
55
of 235
