DAP-600P
Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter
Description
Action
Select an action for the rule.
•
Allow
: Allows packet transmission in accordance with the
criteria specified by the rule.
•
Deny
: Denies packet transmission in accordance with the
criteria specified by the rule.
Protocol
A protocol for network packet transmission. Select a value from the
drop-down list.
IP version
An IP version to which the rule will be applied. Select the relevant
value from the drop-down list.
Direction
The direction of network packet transmission to which the rule will
be applied. Select the relevant value from the drop-down list.
•
LAN to WAN
: The rule will be applied to the packets
transmitted from the local network to the external network.
•
WAN to LAN
: The rule will be applied to the packets
transmitted from the external network to the local network.
•
LAN to Router
: The rule will be applied to the packets
transmitted from the local network to DAP-600P.
Source IP address
Set as
Select the needed value from the drop-down list.
Start IPv4 address /
Start IPv6 address
The source host start IPv4 or IPv6 address.
If it is necessary to specify a single address, leave the
End IPv4
address / End IPv6 address
field blank.
You can choose a device connected to the access point's LAN at the
moment. To do this, select the relevant IPv4 or IPv6 address from the
drop-down list (the field will be filled in automatically).
End IPv4 address /
End IPv6 address
The source host end IPv4 or IPv6 address.
Subnet IPv4 address /
Subnet IPv6 address
The source subnet IPv4 or IPv6 address. The field is displayed when
the
Subnet
value is selected from the
Set as
drop-down list.
Destination IP address
Set as
Select the needed value from the drop-down list.
Page
191
of 235
