DAP-600P
Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Configuring Wireless Network
This configuration step is available for the
Router
,
Access point
,
WISP Repeater
, and
Repeater
modes.
1. On the
Wireless Network 2.4 GHz
page, in the
Network name
field, specify your own
name for the wireless network in the 2.4GHz band or leave the value suggested by the
access point.
2. In the
Password
field, specify your own password for access to the wireless network or
leave the value suggested by the access point (WPS PIN of the device, see the barcode
label).
3. If the access point is used as a Wi-Fi client, you can specify the same parameters of the
wireless network as specified for the network to which you are connecting. To do this, click
the
USE
button (available for the
WISP Repeater
and
Repeater
modes only).
4. You can restore the parameters of the wireless network specified before resetting to factory
defaults. To do this, click the
RESTORE
button.
Figure 51. The page for configuring the wireless network.
Page
66
of 235
