D-Link DAP-600P User Manual Download Page 18

Page: 18 / 235

DAP-600P

Wireless AC2600 Wave 2 MU-MIMO Dual Band

PoE Access Point / Router

User Manual

Installation and Connection

Connecting to Mobile Device with D-Link Assistant Application

1. Connect the power adapter (not included in the delivery package) to the power connector

port on the back panel of the access point, then plug the power adapter into an electrical
outlet or power strip.

2. Make sure that the Wi-Fi connection on your mobile device is on. To switch it on, go to the

mobile device settings.

3. In the list of available wireless networks on your mobile device, select the wireless network

DAP-600P

(for operating in the 2.4GHz band) or

DAP-600P-5G

(for operating in the

5GHz band).

4. In the opened window, enter the network key (see WPS PIN on the barcode label on the

bottom panel of the device) as the password and connect to the wireless network of DAP-
600P.

5. In the settings of the wireless network

DAP-600P

(for operating in the 2.4GHz band) or

DAP-600P-5G

(for operating in the 5GHz band) on your mobile device, in the

Settings

field, select the

Static

value (for Android) or the

Manual

value (for iOS).

6. Enter the value

192.168.0.51

in the

IP address

field. For iOS devices, also specify the

subnet mask

255.255.255.0

. Confirm the changed settings.

7. Launch D-Link Assistant application on your mobile device. The application is available for

Android and iPhone smartphones in AppStore and Google Play.

D-Link Assistant for Android

D-Link Assistant for iOS

2 Field names may vary in different versions of operating systems on mobile devices.

Page

of 235

Summary of Contents for DAP-600P












































































































































































































































Search results

Summary of Contents for DAP-600P

Reviews:

Brands by name

Popular brands

D-Link DAP-600P, User Manual

Search results

Summary of Contents for DAP-600P

Reviews:

Brands by name

Popular brands