DAP-600P
Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Parameter
Description
Local IP Address
Mode of local IP
address assignment
Available if the
Access point
or
Repeater
mode was selected in
the Initial Configuration Wizard.
Select the needed value from the drop-down list.
•
Static
: The IPv4 address, subnet mask, and the gateway IP
address are assigned manually.
•
Dynamic
: The access point automatically obtains these
parameters from the LAN DHCP server or from the router to
which it connects.
IP address
The IPv4 address of the access point in the local subnet. By default,
the following value is specified:
192.168.0.50
.
Mask
The mask of the local subnet. By default, the following value is
specified:
255.255.255.0
.
Gateway IP address
Available if the
Access point
or
Repeater
mode was selected in
the Initial Configuration Wizard.
The gateway IPv4 address which is used by the access point to
connect to the Internet (e.g., for synchronizing the system time with
an NTP server).
Optional
.
Hostname
The name of the device assigned to its IPv4 address in the local
subnet.
Figure 65. Configuring the local interface. The
IPv4
tab. The
Dynamic IP Addresses
section.
Page
80
of 235
