manualshive.com logo in svg

D-Link DAP-600P, User Manual

Share
Download
D-Link DAP-600P User Manual Download Page 14

DAP-600P

 

Wireless AC2600 Wave 2 MU-MIMO Dual Band

PoE Access Point / Router

User Manual

Overview

Back Panel

Figure 2. Back panel view.

Port

Description

RESET

A button to restore the factory defaults.
To restore the factory defaults, push the button (with the device turned
on), hold it for 10 seconds, and then release the button.

LAN

An Ethernet port to connect a computer or network device.
A 

LAN

 LED corresponds to the port. The operating modes:

Solid green

A device (computer) is connected to the port,
the connection is on.

Blinking green

Data transfer through the LAN port.

No light

The cable is not connected to the port.

WAN (PoE)

A port with PoE support to connect  

to  a switch, a private Ethernet

line, or a cable or DSL modem

. In the access point mode, it is used as

the LAN port.
An 

INTERNET

 LED corresponds to the port. The operating modes:

Solid green

The cable is connected to the port.

Blinking green

Data transfer through the WAN port.

No light

The cable is not connected.

Page 

14

 of 235

Summary of Contents for DAP-600P












































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands