DAP-600P
Wireless AC2600 Wave 2 MU-MIMO Dual Band
PoE Access Point / Router
User Manual
Configuring via Web-based Interface
Configuration
On the
System / Configuration
page, you can change the password for the administrator account
used to access the web-based interface of the access point and to access the device settings via
TELNET and SSH, restore the factory defaults, backup the current configuration, restore the access
point's configuration from a previously created file, save the changed settings to the non-volatile
memory, reboot the device, or change the web-based interface language.
Figure 148. The
System / Configuration
page.
In order to change the password for the administrator account, in the
User
section, enter a new
password in the
New password
and
Password confirmation
fields. Use digits, Latin letters
(uppercase and/or lowercase), and other characters available in the US keyboard layout.
Click the
Show
icon (
) to display the entered values. Then click the
SAVE
button.
!
Remember or write down the new password for the administrator account. In case of losing
the new password, you can access the settings of the
access point
only after restoring the
factory default settings via the hardware
RESET
button. This procedure wipes out all
settings that you have configured for your
access point
.
To change the web-based interface language, select the needed value from the
Language
drop-
down list.
10 0-9, A-Z, a-z, space, !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~.
Page
202
of 235
