50
50
Setting the Ethernet (Wired) Interface
The following sections describe how to configure “Wired” address and related
settings on the D-Link DWL-2210AP:
• Navigating to Ethernet
• Setting the DNS Name
• Configuring an Internal LAN and a Guest Network
• Using VLANs for the Guest Network
• Configuring Internal Interface Ethernet Settings
• Configuring Guest Interface Ethernet Settings
• Updating Settings
The Ethernet Settings, including guest access, are not shared across the
cluster. These settings must be configured individually on the Administration
pages for each access point. To get to the Administration pages for an access
point that is a member of the current cluster, click on its IP Address link on
the Cluster > Access Points page of the current AP. For more information
about which settings are shared by the cluster and which are not, see
“Which Settings are Shared as Part of the Cluster Configuration and Which
Are Not?” in this manual.
Ethernet (Wired) Settings describe the configuration of your
Ethernet
local area network
(
LAN
).
Summary of Contents for AirPremier DWL-2210AP
Page 193: ...193 ...