132
133
132
List of available networks will
change depending on client
location. Each network (or access
point) that is detected by the client
shows up in this list. (“Refresh”
updates the list with current
information.)
For each network you want to
connect to, configure security
settings on the client to match the
security mode being used by that
network.
Note:
The exception to this is if
the AP is configured to prohibit
broadcast of its network name, the
name will not show on this list. In
that case you would need to type
in the exact network name to be
able to connect to it.
Appendix A: Configuring Security Settings on Wireless Clients
This brings up the Wireless Network
Connection Properties dialog with
the Association and Authentication
tabs for the selected network.
From the list of “Available networks”,
select the SSID of the network to
which you want to connect and
click
Configure
.
Use this dialog for configuring
all the different types of client
security described in the following
sections. Make sure that the
Wireless Network Properties
dialog you are working in pertains
to the Network Name (SSID) for
the network you want to reach
on the wireless client you are
configuring.
2.
Summary of Contents for AirPremier DWL-2210AP
Page 193: ...193 ...
