162
163
162
Appendix B: Troubleshooting
The Stop Clustering page for this access point is displayed.
Click the
Stop Clustering
button.
Repeat this “stop clustering” step for every access point in the cluster.
Table 1:
Do not proceed to the next step of resetting any access points until you have stopped
clustering on all of them. Make sure that you first “Stop Clustering” on every access
point on the subnet, and only then perform the next part of the process of resetting
each one to the factory defaults.
2. Reset each access point.
To do this, go to the Administration Web pages of the access point you want to reset
by entering its URL into the address bar of your Web browser:
http://
IPAddressOfAccessPoint
/
Where
IPAddres0sOfAccessPoint
is the IP address of the access point you
want to reset.
Summary of Contents for AirPremier DWL-2210AP
Page 193: ...193 ...
