D-Link AirPremier DWL-2210AP Manual Download

Page: 3 / 193

Contents of Package:

D-Link

Air

Premier DWL-2210AP

802.11g Wireless Adaptive Access Point

Power over Ethernet base unit

Power Adapter-DC 48V, 0.4A
Power cord

Manual and Warranty on CD

Quick Installation Guide

Ethernet Cable

Internet Explorer Version 6.0 or Netscape Navigator Version

6.0 and Above

Computers with Windows, Macintosh, or Linux-based

operating systems with an installed Ethernet adapter

Package Contents

Note: Using a power supply with a different voltage rating than the one included with

the DWL-2210AP will cause damage and void the warranty for this product.

If any of the above items are missing, please contact your reseller.

System Requirements for Conﬁguration:







Summary of Contents for AirPremier DWL-2210AP


































































































































































































Search results

Summary of Contents for AirPremier DWL-2210AP

Reviews:

Related manuals for AirPremier DWL-2210AP

Brands by name

Popular brands

D-Link AirPremier DWL-2210AP, Manual

Search results

Summary of Contents for AirPremier DWL-2210AP

Reviews:

Related manuals for AirPremier DWL-2210AP

Brands by name

Popular brands