D-Link AirPremier DWL-2210AP Manual Download Page 8

Page: 8 / 193



Self-managed access points with automatic conﬁguration synchronization

The access points in a cluster periodically check that the cluster

conﬁguration is consistent, and check for the presence and availability of the

other members of the cluster. The administrator can monitor this information

through the user interface.



Enhanced local authentication using 802.1x without additional IT setup

A cluster can maintain a user authentication server and database stored on

the access points. This eliminates the need to install, conﬁgure, and maintain

RADIUS

infrastructure, and simpliﬁes the administrative task of deploying

a secure wireless network.



Hardware watchdog

Clustering and Auto-Management (continued)

Networking



Dynamic Host Conﬁguration Protocol (

DHCP

) support for dynamically

assigning network conﬁguration information to systems on the LAN



Virtual Local Area Network (VLAN) support (for Guest Access)

Maintainability



Status, monitoring, and tracking views of the network including session

monitoring, client associations, transmit/receive statistics, and event log



Link integrity monitoring to continually verify connection to the client,

regardless of network trafﬁc activity levels



Reset conﬁguration option



Firmware upgrade

What’s Next?

Ready to get started with wireless networking? Read through the

PreLaunch Checklist:

Default Settings and Supported Administrator/Client Platforms

and then follow the steps in

Quick Steps for Setup and Launch of Your Wireless Network.

Features and Beneﬁts (continued)

Summary of Contents for AirPremier DWL-2210AP


































































































































































































Search results

Summary of Contents for AirPremier DWL-2210AP

Reviews:

Related manuals for AirPremier DWL-2210AP

Brands by name

Popular brands

D-Link AirPremier DWL-2210AP, Manual

Search results

Summary of Contents for AirPremier DWL-2210AP

Reviews:

Related manuals for AirPremier DWL-2210AP

Brands by name

Popular brands