FR Family FR81S Series, Emulation System, Doc. No. 002-04887 Rev. *A
12
4. Installation of the Emulation System
This chapter describes, what should be considered and checked before power-up the emulation system. Also the
start-up procedure of the emulation system is described.
In order to properly install the emulation system, follow the following steps.
4.1
Features MB2100-01-E
For emulation and debugging of the FR81S devices the embedded emulator MB2100-01-E is used.
In the next chapters the features of the MB2100-01-E embedded emulator are explained. For further explanation
refer to ‘MB2100-01-E Hardware Manual’ (SS01-00026-1E.pdf)
4.1.1
Checking the delivered product
Before using the product, confirm that the following components are included in the box:
1x Emulator unit
1x USB cable (USB-ECOM520: Elecom Co. Ltd.)
1x Debug interface cable (2m) (MB2100-201-E)
1x Coaxial connector
1x (HRM-300-126B (40): HIROSE ELECTRIC Co., Ltd.)
1x Operation manual (English version, this manual)
1x Operation manual (Japanese version)
4.1.2
Appearance and part names
In Figure 2-1 and Table 4-1 the external appearance and component names of the embedded emulator MB2100-
01-E are shown.
