SOFTUNE Workbench Getting Started
FR Family FR81S Series, Emulation System, Doc. No. 002-04887 Rev. *A
26
Table 5-1. Setup Items for Debugging
Item
Setup Value
Debug Type
Emulator Debugger
ICE Type
MB2100-01 (Default)
Monitor program Auto-loading
Checked
Device Type
USB
Oscillation Frequency
Depends on oscillation frequency (e.g. 4MHz)
Length DEBUG I/F cable
Depends on your cable length
Software Brake
Depend on your debugging
Specification batch file
Default: Not specified
Auto load
Checked
Batch file (before/after)
Default: Not specified
e.g. insert a .prc file which should be loaded before or after loading file
Select setting item
Select All
5.2.2
Start debug session
Before starting the debugging with On Chip Debugger, please check hardware connection which is described in
the chapter “4.2 Connecting and installation of MB2100-01-E”
Power on the emulator. The
“Power” LED of Emulator turns on and also “READY” LED of Emulator turns on
with blue colour.
Note8:
In this point, Board power keeps off
Figure 5-12. Power on of MB2100-01-E
Start the debug session via [Debug] -> [Start Debug] from SOFTUNE GUI menu or by double-click on .sup
file
SOFTUNE asks for “Power on Reset”
Power on the StarterKit before clicking “OK” on sub-window
P
o
w
e
r
S
W
P
o
w
e
r
O
n
