SOFTUNE Workbench Getting Started
FR Family FR81S Series, Emulation System, Doc. No. 002-04887 Rev. *A
25
5.2
Debugging in SOFTUNE Workbench
Evaluation and Debugging with Softune Workbench
This chapter describes how to start debug a project in Cypress SOFTUNE Workbench.
5.2.1
Create and edit setup file
Before starting a debug session, some setups have to be done.
Click
the “Debug” of the explore window with right mouse click and select [Add Setup]->[New] with the right
click
Figure 5-10. Setup New Debug Session
Now it is possible to insert an own name for the setup file
Figure 5-11. Setup New Debug Session, Name
Note7:
In case of existing setup file, you can also edit this by right mouse click
and select [Edit]
Follow the Setup Wizard and click on “Next” when following settings are done:
