Software Installation
FR Family FR81S Series, Emulation System, Doc. No. 002-04887 Rev. *A
11
After successful installation you can open an installed propack by selection of the [SOFTUNE V6] tab and
press on enabled button in the [FR] line
The updated USB driver
wdapi1021.dll
file for Win7 is replaced by every new
installation. After an installation please rename
wdapi1021.dll
to
wdapi1021_old.dll
and copy
wdapi1021_32.dll into “C:\Windows\sysWOW64” and change filename to
wdapi1021.dll.
3.3.2
Installation without MultiVersionManager
The development with Cypress MCU needs SOFTUNE Workbench as Integrated
Development Environment (IDE).
The following instructions are necessary for the installation of SOFTUNE Workbench:
Note 1:
To install the software under Windows 7/Vista/XP/2000, the user requires
administration authority. Please refer to chapter 3.1 .
On the CD image you will find a folder „SOFTUNE“
Unpack
the „CD_Image“ from
minimum
Propack911s-rev600011.zip to a local device on your computer
After the unpacking,
execute „Setup.exe“ to install SOFTUNE Workbench
Follow the instructions of the setup program
Select a specific path for the installation, e.g. C:Program Files/ SOFTUNE6
With the installation a SOFTUNE6 folder will be created
When finished the installation, check for following files:
a. 911.csv
b. FSDIO200.csv
c.
Folder „Flash“
from following link:
The updated USB driver
wdapi1021.dll
file for Win7 is replaced by every new
installation. After an installation please rename
wdapi1021.dll
to
wdapi1021_old.dll
and copy
wdapi1021_32.dll into “C:\Windows\sysWOW64” and change filename to
wdapi1021.dll.
