SOFTUNE Workbench Getting Started
FR Family FR81S Series, Emulation System, Doc. No. 002-04887 Rev. *A
27
Figure 5-13. "Power on Reset": Sub-window for
Debug mode is started
5.2.3
Executing and debugging the application
For executing and debugging your application some first introduction explanations follow.
Select [Debug]->[Run]->[Go], press F5 or the
button the execute/run your application
For stopping [Debug]->[Abort], or the
button. The emulator system now is being halted. The execution
can be continued by entering the “Go”-Mode again.
Set a breakpoint or sequence by pressing right mouse click into window (-> [Break]) or setting an red X such
as shown in Figure 5-14.
Select [View]->[Trace] for tracing the application
Mark a variable and click right mouse button -> [Watch] to watch a variable value changed
In Figure 5-14 a short overview of the debug functionality is given. For further explanations refer to Cypress
SOFTUNE Workbench feature description documents.
Figure 5-14. Short Overview for Debug Functionality
