CYALKIT-E02 Solar-Powered BLE Sensor Beacon Reference Design Kit Guide, Doc. No. 002-11317 Rev. *C
10
□
Expandable interface via 10-pin connector (GPIO)
□
Test pads for power, ground, primary battery input, and SWD interface for programming
Debug board that can support the following:
□
Debug board for receiving BLE data
□
Selecting the programming mode using a slide switch (EZ-BLE on Solar BLE Sensor or PRoC BLE on Debug
Board)
□
Connector for Solar BLE Sensor (power, SWD, UART, USB detect, charging supercapacitor, and GPIO)
□
Connector for programming PSoC 5LP (KitProg)
□
Parameter setting of Solar BLE Sensor via USB-to-UART bridge on KitProg
□
Reset button for EZ-BLE and PRoC BLE
□
User button for PRoC BLE
□
LEDs for User, Status and USB power
□
Test pads for power, ground and expandable GPIO
Includes reference schematic, BOM list, layout, and sample firmware for easy design
Uses the following Cypress devices:
□
S6AE103A ultra-low-power energy harvesting PMIC
□
CYBLE-022001-00 EZ-BLE PRoC module
□
CYBL10162-56L PRoC BLE IC
□
CY8C5868L PSoC 5LP for KitProg
□
MB39C022G LDO
