CYALKIT-E02 Solar-Powered BLE Sensor Beacon Reference Design Kit Guide, Doc. No. 002-11317 Rev. *C
43
4.2.2 Programming and Debugging Using PSoC Creator
1. Plug the Debug Board into your computer
’s USB port.
2. If you installed the RDK software to the default location, copy the BLE folder to your local folder. Note that the following
warning message appears when the folder is in C:\Program Files or C:\Program Files (x86).
The BLE folder is located in the Firmware folder that you installed earlier:
<Install directory>\CYALKIT-E02 Solar-Powered BLE Sensor Beacon RDK\<version>\Firmware
8.
Open Solar_BLE_Sensor.cywrk or Debug_Board.cywrk for the example project.
9.
Clean and build the project by choosing Build > Clean and Build <Project Name>.
PRoC BLE
EZ-BLE
SW3
