CYALKIT-E02 Solar-Powered BLE Sensor Beacon Reference Design Kit Guide, Doc. No. 002-11317 Rev. *C
5
Safety Information
<
Regulatory Compliance
The CYALKIT-E02 Solar-Powered Bluetooth Low Energy (BLE) Sensor Beacon Reference Design Kit (RDK) is intended for
use as a development platform for hardware or software in a laboratory environment. The board is an open system design,
which does not include a shielded enclosure. This may cause interference with other electrical or electronic devices in close
proximity. In a domestic environment, this product may cause radio interference. In this case, the user may be required to take
adequate preventive measures. Also, the board should not be used near any medical equipment or RF devices.
Attaching additional wiring to this product or modifying the product operation from the factory default may affect its
performance and cause interference with other apparatus in the immediate vicinity. If such interference is detected, suitable
mitigating measures should be taken.
The CYALKIT-E02 Solar-Powered BLE Sensor Beacon RDK as shipped from the factory has been verified to
meet the requirements of CE as a Class A product.
The CYALKIT-E02 Solar-Powered BLE Sensor Beacon RDK contains electrostatic discharge
(ESD) sensitive devices. Electrostatic charges readily accumulate on the human body and any
equipment and can discharge without detection. Permanent damage may occur to devices
subjected to high-energy discharges. Proper ESD precautions are recommended to avoid
performance degradation or loss of functionality. Store unused CYALKIT-E02 boards in the
protective shipping package.
End of Life/Product Recycling
The end of life of this kit is five years after the date of manufacture mentioned on the back of the
box. Contact your nearest recycler to discard the kit.
