CYALKIT-E02 Solar-Powered BLE Sensor Beacon Reference Design Kit Guide, Doc. No. 002-11317 Rev. *C
15
3. Getting Started
<
In this chapter, y
ou will become familiar with the Solar-Powered BLE Sensor Beacon RDK by successfully establishing a BLE
sensor beacon connection
between
the Solar BLE Sensor operating as a wireless sensor network (WSN), a PC with the
Debug Board, and a mobile device with apps. This will also confirm that the Solar BLE Sensor, the Debug Board, your PC,
and your mobile device are operating properly.
3.1 WSN Operation with PC
In this section, you will confirm that the Solar BLE Sensor is operating as a WSN by using the software provided on your PC to
detect temperature and humidity changes.
3.1.1 USB Driver Installation of Debug Board
1. Set the slide switch (SW3) on the Debug Board to the PRoC BLE side. Refer to
Slide Switch for Target Device Select
for
detailed information on each mode.
2. Plug the Debug Board into your computer
’s USB port.
3.
The driver Installation starts automatically and the following message window will appear. Click the message window
for the status.
PRoC BLE
EZ-BLE
SW3
