Cypress CYALKIT-E02, Reference Design Kit Manual

Page: 31 / 90

Getting Started
CYALKIT-E02 Solar-Powered BLE Sensor Beacon Reference Design Kit Guide, Doc. No. 002-11317 Rev. *C 31
14. Confirm the changed MAJOR value 0x000A via PC (Refer to 3.1 WSN Operation with PC ) or apps (Refer to 3.2 WSN
Operation with Mobile Device ) by energy harvesting operation.
Refer to Table 3-1 for the time interval of the energy harvesting operation.
3.4 Serial Command List
Table 3-2 lists the serial commands that can be used to control the kit from your computer using the USB serial interface.
Refer to the 3.3 Configuring Solar BLE Sensor section for instructions on how to issue these commands via the USB serial
interface. The commands are not case-sensitive.
Note that the following commands are for CYALKIT-E02 Sample Firmware, Version 1.2.00. Refer to 4.2 Programming and
Debugging section for instructions on how to program the firmware.
Table 3-2. Command List
No.
Command
Name
Command
Use
Description Default
[1] UUID
For BLE
Beacon Mode
Read/Write of UUID
1
00050001-0000-1000-8000-00805F9B0131 [hex]
[2] MAJOR Read/Write of MAJOR
1
0x0001
[3] TXPWR
Read/Write the Transmitter Power
Strength in BLE Beacon mode
3 dBm
[4] RSSI
Read/Write of Received Power
Strength for distance 1m (RSSI)
-61 dBm
[5] COID Read/Write of Bluetooth Company 0x004C
[6] EDNID
For Eddystone
Mode
Read/Write NID CB6F15CEC02A41F76AB1 [hex]
[7] EDBID Read/Write BID 000000010001 [hex]
[8] EDTXPWR
Read/Write the Transmitter Power
Levels in Eddystone mode
-18 -12 0 3 dBm
[9] EDFRAME
Read/Write Eddystone Frame
Advertisement Flags
uid on, url off, tlm on
[10] EDSTATE Read the Lock State Unlocked
[11] EDLOCK
Lock Eddystone-URL Configuration
Service and set the lock-code
00000000-0000-0000-0000-000000000000 [hex]
[12] EDUNLOCK
Unlock Eddystone-URL Configuration
Service
-
[13] EDURI Read/Write the URL http://www.cypress.com/
PC
Apps