CYALKIT-E02 Solar-Powered BLE Sensor Beacon Reference Design Kit Guide, Doc. No. 002-11317 Rev. *C
30
11. You can recognize the changed
MAJOR value 10
(Decimal) on apps when using USB bus power (initial time interval is
1.5 s when using USB bus power).
12. Disconnect the Debug Board from the PC and then disconnect the Solar BLE Sensor from the Debug Board. Set the
slide switch (SW3) on the Debug Board to the PRoC BLE side to receive the sensor data.
13. Plug the Debug Board into your computer
’s USB port again.
PRoC BLE
EZ-BLE
SW3
