CYALKIT-E02 Solar-Powered BLE Sensor Beacon Reference Design Kit Guide, Doc. No. 002-11317 Rev. *C
7
1. Introduction
,
Thank you for your interest in the CYALKIT-E02 Solar-Powered BLE Sensor Beacon RDK. The Solar-Powered BLE Sensor
Beacon RDK provides an easy-to-use platform for the development of a tiny solar-powered IoT device with BLE wireless
connectivity. The RDK consists of a Solar BLE Sensor and a Debug Board. The Solar BLE Sensor
is based on Cypress’s
energy harvesting power management IC (PMIC) S6AE103A and EZ-BLE products. The objective of this RDK is to provide a
fully functional battery-less wireless sensor node (WSN). The Solar BLE Sensor will be enclosed in a casing to automatically
transmit temperature and humidity sensor data in an office lighting environment. The Debug B
oard is based on Cypress’s
PRoC
™ BLE and PSoC
®
5LP products. It can be connected to a host (PC) that supports the Debug Board and on-chip
debugging via a USB interface.
This kit guide explains how to set up and use the RDK. Be sure to read it before using the product. For questions, please
consult with sales or support representatives.
Note:
All information included in this document is current as of the date it was issued. Such information is subject to change
without any prior notice. Please confirm the latest relevant information with the sales representative.
1.1 Kit Introduction
Figure 1-1. Kit Contents
1. Solar-Powered BLE Sensor Beacon (Solar BLE Sensor)
-
Board + Enclosure
2. BLE-USB Bridge and Debug Board (Debug Board)
3. Quick Start Guide
＋
