CY3280-MBR2 CapSense Express with SmartSense Auto-Tuning Kit Guide, Doc. # 001-71857 Rev. *C
37
Sample Configurations
b. Touch the
Power
button to turn
ON
the kit. Ensure Power button, LED1, LED2 and Attention
button glows.
c. Click the
Connect
button on the
Main Console tab
of the EZ-Click customizer tool. Ensure
you see the device connected in the status window of the Main Console tab.
7. Click on
Apply Current Config
under
Configuration
menu to apply the configuration to the kit.
Figure 5-3. Apply Current Configuration
8. Touch the
Power
button to power the kit.
9. Verify the following features:
❐
LED ON time (1.5 sec):
Touch any CapSense button; the respective LED turns on. When the
finger is released, the LED turns off after 1.5 seconds.
❐
Button auto reset (5 sec):
Touch any CapSense button; the respective LED turns on. Do not
release the finger; the button will go off automatically after 5 seconds.
❐
Automatic threshold:
This feature automatically keeps an optimum finger threshold value for
all the buttons.
5.1.2
Loading Configuration File 2
The GUI images for the following steps are similar to
5.1.1 Loading Configuration File 1 on page 35
:
1. Steps 1 to 3 remains the same as mentioned
2. Navigate to the project directory
<Install_Directory>:\Program Files\Cypress\
CY3280-MBR2\<version>\Sample Configurations\Sample Configuration 2
in the
Open Project - Select Project Location
window.
3. Double-click on the
Sample Configuration 2
file to open.
4. Follow the steps 4 to 6 mentioned in section
to continue.
5. Verify the following features:
❐
Buzzer:
Touch any button; the respective LED turns ON along with an audio feedback.
❐
Power-on LED effects:
Observe LED effects on all the buttons upon power up.
❐
Button controlled LED effects:
Observe LED effects on touching any CapSense button.
❐
Automatic threshold:
This feature automatically keeps an optimum finger threshold value for
all the buttons.
❐
Debounce control on Button 1:
Observe that button 1 is activated only after you touch the
button for approximately 1 second.
