20
CY3280-MBR2 CapSense Express with SmartSense Auto-Tuning Kit Guide, Doc. # 001-71857 Rev. *C
Kit Operation
Figure 3-7. FSS Enabled
3.2.4
LED ON Time
3.2.4.1
Enable LED ON Time
Go to the
Visual Config
tab; select the
LED ON time
checkbox to enable this feature. This is a
global setting applicable for all CapSense buttons. To set the time, configure the
LED ON time
menu
below the checkbox.
Figure 3-8. LED ON Time Enabled
3.2.4.2
Test CapSense Buttons with LED ON Time Enabled
Touch any CapSense button; the respective LED turns on. When the finger is released, the LED
turns off after the duration specified in
LED on time
(msec) in the
Visual Config
tab.
Button LED glows on touch
Second button glows after the
the touch on the first button
Second button does not glow if
is continued
finger from the first touched
button is removed
