Cylinda S 6264 KVEP, User Manual

Page: 35 / 56

35
Cancel settings
Timer and automatic function settings
may be cancelled at any time.
Cancel automatic function settings:
l
press sensors < and > simultane­
ously,
Cancel timer settings:
l
press sensor MENU to select
timer settings,
l press sensors < and > again.
Change the timer beeps
The tone of the timer beeps may be
changed as follows:
l press sensors < and > simultane­
ously,
l
select “tone” function with the
MENU sensor, the display panel
will start to blink: ton 1 ,
l with the < sensor press the appro­
priate beeps from 1 to 3 to select
the option you wish.
l
Set the oven function knob and the
temperature regulator knob to the
switched–off position.
l
Press sensor MENU, < or > in
order to switch off the alarm; the
function AUTO will go out and the
display will show the current time.
Automatic operation
If the oven is to be switched on for a
specified period of time and switched
off at a fixed hour then you should set
the operation time and the operation
end time:
l
Press sensor MENU until the dis­
play will show: dur,
l
Set the required time using the
sensors
>
and
<
within a range
from 1 minute to 10 hours.
l Press sensor MENU until the dis­
play will show:
End
,
l Set the switch–off time (operation
end time) using sensors > and < ,
which is limited to a period of 23
hours and 59 minutes from the
current time.
l
Set the oven function knob and
the temperature regulator knob
to the setting at which you want
the oven to operate. The func­
tion AUTO is now on; the oven
will start operating from the point
when the difference between the
set operation end time and the
operation duration time occurs
(e.g. the operation time is set to
1 hour, the operation end time is
set to 14.00, so the oven will start
working automatically at 13.00).
When the oven reaches the operation
end time it will switch off automati ­
cally, the alarm will be activated and
the function AUTO will start flashing
again.