Cylinda S 6264 KVEP, User Manual

Page: 33 / 56

33
Setting the time
After connection to the mains or
reconnection after a power cut the
display shows flash “ 0.00 ”.
l
Press sensor MENU, then the
display will show ,
l
set the time using sensors
<
and
>
.
7 seconds after the time has been set
the new data will be saved.
Caution!
If the correct time is not set then
proper operation of the oven is not
possible.
– funktions
Electronic programmer
Caution!
The time “ 0.00 ” will start flashing in
the display field upon connection to
the power supply.
The programmer should be set with
the current time. (See
Electronic
programmer
). If the current time
is not set operation of the oven is
impossible.
MENU – function selection sensor
< – sensor “­”
> – sensor “+”
00 00
Electronic sensors are switched on by
touching or pressing the sensor surface
for at least 2 seconds.
Each sensor reaction is confirmed by
the beep.
Keep the sensor surface clean at all
times.