Cylinda S 6264 KVEP, User Manual

Page: 34 / 56

34
Timer
The timer can be activated at any
time, regardless of the status of other
functions. The timer can be set for
from 1 minute to up to 23 hours and
59 minutes.
To set the timer you should:
l
Press sensor MENU, then the
display will show flashing ,
l
set the timer using sensors
>
and
<
.
The time set is shown on the display
and the signal function is on.
l
Press sensor MENU,
<
or
>
in
order to switch off the signal, the
signal function will go out and
the display will show the current
time.
Caution!
If the alarm signal is not turned off
manually, it will be turned off auto ­
matically after approx. 7 minutes.
Semi–automatic operation
If the oven is to be switched off at a
given time, then you should:
l
Set the oven function knob and the
temperature regulator knob to the
setting at which you want the oven
to operate.
l
Press sensor MENU until the di­
splay will show: dur .
l Set the required time using sen­
sors > and < , within a range from
1 minute to 10 hours.
The set time will be introduced to the
memory after approx. 7 seconds and
the display will show AUTO function.
When the set time has passed the
oven is switched off automatically,
the alarm signal is activated and the
signal function AUTO flashing again;
l Set the oven function knob and the
temperature regulator knob to the
switched–off position.
l
Press sensor MENU, < or > in
order to switch off the signal; the
signal function will go out and the
display will show the current time.