![background image](http://html1.mh-extra.com/html/cybex/autoview-200/autoview-200_installer-and-user-manual_2703690025.webp)
19
Editing Channel Names and Addresses
1. Highlight the channel you wish to change in the main OSD Window.
2. Press the
Control
key twice to access the Command Menu or press
the
F2
key once. (If you press
F2
skip Step 3)
3. Select ‘Edit Channel’ from the Command Menu.
4. Enter the new channel name, address, ID Dwell time and Scan
Dwell time. Press
Enter
to accept.
5. After selecting “ID Setup”, use the arrow keys, position the ID
window to where you would like it to appear when this channel is
selected. Then press
Enter
. (For further information see ‘The ID
Window’ later in this chapter.)
6. Select “Save Changes” and press
Enter
to accept.
Press
Esc
at any point to exit this operation without saving the changes.
Deleting an Existing Channel
1. Highlight the channel you wish to delete in the main OSD Window.
2. Press the
Control
key twice to access the Command Menu or
simply press the
DELETE
key. (If you press
DELETE
skip Step 3)
3. Choose the ‘Delete Channel’ option.
4. Type Y or N at the prompt to confirm the deletion and press
Enter
.
On-Screen Display Operations