AutoView 200 Installer/User Guide
Key Sequence
Action
<CM>
SG
<Enter>
Enables the scan Go command.
(By Address Only)
<CM>
SH
<Enter>
Enables the scan Halt command.
From the OSD menu.
1. From the main OSD Window, press the
Control
key twice to
access the Command Menu.
2. Toggle ‘Scanning OFF’, ‘Scan by Name’ or ‘Scan by address’ from
the menu. This is a toggle option - only one scanning option will
show on the menu at any one time.
Selecting ‘by Name’ will scan channels alphanumerically by
name, ‘by Address’ will scan channels alphanumerically by
channel address.
3.
Press
Enter
.
With the Scan Button
1. You may initiate scanning by address by pressing and holding the
Step/Scan push-button until the SCAN LED lights green.
2. Scanning may be halted if a channel is selected, or if the Step/
Scan push-button is pressed again.
By keyboard hot-key sequence
The following key sequences control scanning.
Turning Scanning
On and Off
30