![background image](http://html1.mh-extra.com/html/cybex/autoview-200/autoview-200_installer-and-user-manual_2703690024.webp)
AutoView 200 Installer/User Guide
18
Basic Channel Maintenance is performed from the Administrator
Command Menu, and is available if you are operating in non-secure
mode or if you are the system administrator. Here you can add, delete or
edit individual channels.
Adding Channels
1. Select ‘Add Channel’ from the Administrator Command Menu or press
the
Insert
key. Type in a new channel name, up to 14 characters long,
and press
Enter
.
2. Type in the address for the PC you are naming and press
Enter
. Please
note that the address cannot be longer than two letters.
3. Enter the dwell time for the ID Window and press
Enter
.
4. Enter the dwell time for scanning and press
Enter.
5. After selecting “ID Setup”, use the arrow keys, position the ID window
to where you would like it to appear when this channel is selected.
Then press
Enter
. (For further information see ‘The ID Window’ later
in this chapter.)
Press
Esc
at any point to exit this operation without adding the channel.
Basic Channel
Maintenance
THE ADD CHANNEL WINDOW
Games
CYBEX Control Panel
Add Channel
Program Manager
ENTER = save
ESC = exit
?
Name
Address
ID Dwell Time
5
Scan Dwell Time
5
ID Setup
Save Changes