Connecting Computers to the AutoView 200
9. Locate your first input cable. It will have a 25-pin “D” connector at one
end. Plug this cable into any lettered channel port on the rear of the
AutoView 200. The other end of the input cable will have five
connectors: a 15-pin “HDD” connector for your video, a 5-pin DIN/6-
pin miniDIN connector for an AT or PS/2 keyboard connection, and a
9-pin serial/6-pin miniDIN connector for a serial or PS/2 mouse
connection. The PS/2 mouse connector is designated by a yellow band
or mouse icon.
Use only the keyboard and mouse connectors that are ap-
propriate for your PC, and leave the others unconnected.
Plug these connectors into the matching ports on your computer.
10. Locate your next input cable. Repeat step 9 until all computers are
properly attached to the AutoView 200.
H
POWER
100-240V~, .1a, 50/60Hz
F
D
B
7
Basic Installation
PS/2 KEYBOARD CABLE
PS/2 MOUSE CABLE
VGA MONITOR CABLE