Options
Spectra II
60
Operating Manual
08.17
7.2.3 Dispenser Photocell
Indication of the current sensor level. This indication is for checking
purposes and cannot be modified.
Indication if a label (value = 1) or if no label (value = 0) was found.
This indication is for checking purposes if the set switch level leads to
a correct label recognition.
Indication of switch level (Default: 1.2).
Transmission power of label sensor [1..255]
Depending on label material (color) the sensor level can be adapted in
order to permit a safe label recognition (Default: 80).
7.2.4 General Parameters
Off:
It is printed without the labels are dispensed.
I/O static:
The input signal evaluated, i.e. it is printed as long as the signal
exists. The number of labels which was entered at the print start is
printed.
The set dispenser offset is not taken into consideration.
I/O static continuous:
For description of this operating mode, see I/O static.
Continuous means that it is printed as long as new data is transferred
via interface
The set dispenser offset is not taken into consideration.
I/O dynamic:
The external signal is evaluated dynamically, i.e. is the printer in
'waiting' mode a single label is printed at each signal changing. After
the print the set dispenser offset is executed, i.e. a backfeed is
effected.
I/O dynamic continuous:
For description of this operating mode, see I/O dynamic.
Continuous means that it is printed as long as new data is transferred
via interface.
Photocell:
The printer is controlled via photocell. The printer prints automatically
a label if the user takes away the label at the dispensing ledge. The
print order is finished when the target number of labels is reached.
Photocell continuous:
For description of this operating mode, see Photcell.
Continuous means that it is printed as long as new data is transferred
via interface.
Dispenser photocell
level
Dispenser photocell
status
Dispenser photocell
threshold level
Dispenser photocell
PWM
Operating modes