Function Menu
Spectra II
48
Operating Manual
08.17
Indication of current dispenser photocell. The function and correct
setting of switching threshold can be examined. No adjustment
possible.
Indication of current transfer ribbon photocell status. The function of
transfer ribbon photocell can be examined (manual rotation of ribbon
unwinder). No adjustment possible.
6.8.2 Device Status
Indication of printhead performance in meters.
Indication of printer performance in meters.
To achieve a high print quality, the indicated Ohm value must be set
after an exchange of printhead.
Indication of printhead temperature. The printhead temperature
corresponds normally to the room temperature. In case the maximum
printhead temperature is exceeded, the current print order is
interrupted and an error message appears at the printer display.
The printing system (printer-dependent) recognizes automatically
whether the cutter (option) is mounted/attached. No adjustment
possible.
1
– The cutter is in the initial position and ready for the cutting
1
–
procedure.
0
– The cutter is not in the initial position. Before you are going to
0
–
release a cutting procedure you first have to place the cutter in
0
–
its initial position.
Dispenser photocell
status
Ribbon sensor status
Paper counter
printhead
Paper counter printer
Heater resistance
Printhead temperature
Cutter available
Cutter Home